Transport, storage and packing
8 9229 9992 176 0D
2013-07-08
• Remove partitions and accessory pack and store safely in the packaging for
later attachment.
• Remove foil from the vacuum circuit-breaker.
• In the case of overseas packaging, push the lower foil onto the pallet floor.
• Check delivery for completeness.
• Check vacuum circuit-breaker for damage.
• If the vacuum circuit-breaker is damaged, ship it back in the transport unit
(see “Reusing the transport unit” on page 16).
Transporting with pallet,
without carton
The vacuum circuit-breaker can be transported with the pallet, without the carton.
• Thread carrying straps under the pallet or
• Transporting with fork lift.
Fig. 4 Removing partitions and foil Fig. 5 Transporting with pallet possible
To Next Page
Loading...
