Router User’s Guide Configuring Network Settings
Host
Host configuration attributes identify the Router on the network and, optionally, specify a default
“gateway” to the Wide Area Network (WAN). Default values for many host IP address, netmask, default
router and host name are automatically generated for the SpeedStream Router and should not be
changed unless directed by your ISP. The ISP may ask you to change this information if, for example,
you are assigned a static IP address.
To specify host configuration settings:
1. Select Setup>Host from the left navigation pane of the Web interface. This displays the “Host
Configuration” window.
2. Change settings as specified by your ISP.
3. Click Save Settings. This displays a confirmation screen displays notification that the new setting will
not take affect until you reboot the router. You may do so at this point or later.
26
To Next Page
Loading...
