Siemens 4100 Series - Firewall - DMZ; Firewall - Level; Firewall - Snooze Control; Host

Router User’s Guide Configuration Data Sheets
Firewall - DMZ
Parameter Default Value Your Value
Status
Enable With Host IP Address
Enable With Host Name
Settings Duration
Firewall – Level
Parameter Default Value Your Value
Level
Firewall – Snooze Control
Parameter Default Value Your Value
Snooze Control
Disable
Enable, Set Time Interval To:
Reset Time Interval To
Host
Parameter Default Value Your Value
IP Address
IP Netmask
Default Router
Host Name
LAN IP
Parameter Default Value Your Value
IP Address
Subnet Mask
NAT/NAPT
Parameter Default Value Your Value
Interface 1
NAT/NAPT Disabled
NAT Enabled
Internal (LAN) IP Address
71