To Next PageTo Next Page
Need help?Do you have a question about the Siemens 6EP1437-3BA10 and is the answer not in the manual?
General| Output Voltage | 24 V DC |
|---|---|
| Output Current | 10 A |
| Power Rating | 240 W |
| Efficiency | up to 93% |
| Protection Class | IP20 |
| Weight | 1.2 kg |
| Dimensions | 125 mm x 125 mm x 150 mm |
| Operating Temperature | -25°C to +70°C |
Provides safety instructions for handling electrical devices and preventing injury or damage.
Details the SITOP PSU8200 3ph as a primary-switched power supply with regulated DC voltage.
Explains how to connect the line input and output terminals, with associated terminal data.
Instructions on how to mount the SITOP PSU8200 on a DIN rail and how to remove it.
Explains how to connect the 3-phase AC line supply, including protection requirements.
Details the connection of loads to the SELV DC output terminals and grounding considerations.
Presents technical specifications related to the AC input voltage, range, and frequency.
Provides technical data for the DC output, including voltage, current, regulation, and ripple.
Shows efficiency curves and power loss data at rated conditions for different input voltages.
Explains how to connect multiple SITOP PSU8200 units in parallel to boost power output.
Describes using redundancy modules for higher availability and fault tolerance of the 24 V supply.
Details connecting two 24 V units in series to achieve 48 V DC output.
Discusses overload protection methods and the use of selectivity modules for branch monitoring.
