M
mmorganSep 6, 2025
What does unknown parameter mean on Siemens UPS?
- DDiane JohnsonSep 6, 2025
Attempting to set a parameter that is not known by Siemens DC UPS.
To Next PageTo Next PageWhat does unknown parameter mean on Siemens UPS?
Attempting to set a parameter that is not known by Siemens DC UPS.
Why is buffer mode not possible on my Siemens UPS?
If buffer mode is not possible on your Siemens UPS, check settings, cabling, fuse, and battery voltages.
How to fix Siemens UPS device temperature too low?
If the Siemens UPS reports a critically low device temperature, ensure a higher ambient temperature.
Why Siemens UPS input voltage is too high?
Siemens DC UPS is not operational.
Why Siemens UPS shows no software update?
Cannot execute the sent command because no software update has been started on your Siemens UPS.
What does EEPROM write error mean on Siemens UPS?
The Siemens UPS device is defective.
What does wrong parameter mean on Siemens UPS?
The parameter value lies outside the valid range on your Siemens UPS.
What does wrong checksum mean on Siemens UPS?
Communication disrupted with your Siemens UPS.
What does insufficient charge level mean on Siemens UPS?
The battery charge level is presently too low on your Siemens UPS to reach the set buffer capacity.
What to do if Siemens UPS shows wrong battery polarity?
If the Siemens UPS indicates wrong battery polarity, check the battery connections to ensure they are correct.
General| Rated voltage V output | 24 V DC |
|---|---|
| Output Current | 5 A |
| Output current at rated value | 5 A |
| Power rating | 120 W |
| Protection class | I |
| Degree of protection | IP20 |
| Input Voltage | AC/DC |
| Input voltage at AC rated value | 120 ... 230 V |
| Type of voltage at input | AC |
| Input voltage range at AC | 85 ... 264 V AC |
| Input voltage range at DC | 110 ... 300 V |
| Line frequency | 47 ... 63 Hz |
| Output Voltage | 24 V |
| Operating temperature | -25 ... 70 °C |
| Voltage curve at input | Sinusoidal |
General safety guidelines for handling electrical devices and preventing hazards.
Details on the physical characteristics and functionality of SITOP UPS1600 and SITOP UPS1100 modules.
Information on terminal layouts and connections for SITOP UPS1600 and SITOP UPS1100 devices.
Explanation of the various controls, switches, and buttons on the SITOP UPS1600 and SITOP UPS1100.
Description of the LEDs and relay outputs used for device status indication on SITOP UPS1600.
Instructions for using SIMATIC STEP 7 in TIA Portal for SITOP UPS1600 integration and configuration.
Guide for using SIMATIC STEP 7 (non-TIA Portal) for SITOP UPS1600 integration and parameterization.
Overview of the SITOP UPS Manager software functions for configuration and monitoring.
Instructions on accessing and using the web server for monitoring and managing the SITOP UPS1600.
Information on configuring and using the OPC UA server for data access from SITOP UPS1600.
Guidance on identifying and resolving hardware-related faults and errors in the SITOP UPS1600.
Instructions for the proper mounting and removal of the SITOP UPS1600 device.
