L
lambertbelindaSep 6, 2025
What does unknown parameter mean on Siemens UPS?
- MMarcus FloresSep 6, 2025
Attempting to set a parameter that is not known by Siemens DC UPS.
To Next PageTo Next PageWhat does unknown parameter mean on Siemens UPS?
Attempting to set a parameter that is not known by Siemens DC UPS.
Why is buffer mode not possible on my Siemens UPS?
If buffer mode is not possible on your Siemens UPS, check settings, cabling, fuse, and battery voltages.
How to fix Siemens UPS device temperature too low?
If the Siemens UPS reports a critically low device temperature, ensure a higher ambient temperature.
Why Siemens UPS input voltage is too high?
Siemens DC UPS is not operational.
Why Siemens UPS shows no software update?
Cannot execute the sent command because no software update has been started on your Siemens UPS.
What does EEPROM write error mean on Siemens UPS?
The Siemens UPS device is defective.
What does wrong parameter mean on Siemens UPS?
The parameter value lies outside the valid range on your Siemens UPS.
What does wrong checksum mean on Siemens UPS?
Communication disrupted with your Siemens UPS.
What does unknown alarm mean on Siemens UPS?
Internal error: Wrong parameter at execution of test command on your Siemens UPS.
What does insufficient charge level mean on Siemens UPS?
The battery charge level is presently too low on your Siemens UPS to reach the set buffer capacity.
General| Output Voltage | 24 V DC |
|---|---|
| Weight | 1.2 kg |
| Protection Class | IP20 |
| Dimensions | 125 x 100 x 75 mm |
| Operating Temperature | -25 to +70 °C |
| Storage Temperature | -40 to +85 °C |
Provides essential safety warnings and guidelines for operating electrical devices.
Provides instructions for mounting and removing the SITOP UPS1600 device.
Details the mounting and removal procedures for SITOP UPS1100 battery modules.
Lists common hardware faults, error types, severity, and troubleshooting help.
Explains how to use the SITOP UPS Manager for configuration, monitoring, and event-driven actions.
Specifies safety protection class, degree of protection, and test voltages.
