To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC ET200SP PS 6EP7133-6AB00-0BN0 24 V/5 A and is the answer not in the manual?
General| Input Voltage | 24 V DC |
|---|---|
| Output Voltage | 24 V DC |
| Output Current | 5 A |
| Mounting Type | DIN Rail |
| Category | Power Supply |
| Power Rating | 120 W |
| Protection Class | IP20 |
| Storage Temperature | -40 to +85 °C |
| Product Type Designation | 6EP7133-6AB00-0BN0 |
| Operating Temperature | -20 to +60 °C |
| Relative Humidity | 5% to 95%, non-condensing |
| Standards | UL |
Overview of the SIMATIC ET200SP PS power supply's features and capabilities.
Provides guidance on the safe handling and operation of the device.
Specific safety precautions for operating the device in hazardous areas.
Instructions for securely mounting the power supply onto a standard mounting rail.
Details the correct vertical mounting orientation and required clearances for optimal performance.
Instructions for connecting the power supply to the AC mains supply.
Guidance on connecting the DC output terminals to loads and proper grounding.
Detailed specifications for the DC output voltage, current, and performance characteristics.
Information on galvanic isolation, protection class, and leakage currents.
Contact information and channels for obtaining technical assistance from Siemens.
