N
Nathaniel FreemanAug 5, 2025
Why is the parameter corrupt on my Siemens Power Supply?
- JJonathan MillerAug 5, 2025
A 'Parameter corrupt' error on your Siemens Power Supply indicates an attempt to write to an unknown or read-only object.
To Next PageTo Next PageWhy is the parameter corrupt on my Siemens Power Supply?
A 'Parameter corrupt' error on your Siemens Power Supply indicates an attempt to write to an unknown or read-only object.
General| Input Voltage | 24 V DC |
|---|---|
| Output Voltage | 24 V DC |
| Output Current | 40 A |
| Battery type | Lead-acid battery |
| Protection class | IP20 |
| Power | 960 W |
| Operating temperature | 0°C to +40°C |
| Storage temperature | -20°C to +60°C |
General safety instructions for handling electrical devices and preventing injury.
Safety guidelines for operating devices in explosive environments (hazardous zones).
Instructions for integrating and configuring SITOP UPS1600 using SIMATIC STEP 7 TIA Portal.
Procedures for retrieving online and diagnostics data from the SITOP UPS1600.
Steps for updating the device firmware using SIMATIC STEP 7 or web server.
Instructions for accessing and using the web server for device monitoring and configuration.
Guide to configuring and using the OPC UA server for data access.
Describes responses and actions for internally identified hardware or software faults.
Instructions for mounting and removing the SITOP UPS1600 device.
Guidelines for mounting and removing SITOP BAT1600 battery modules.
Instructions for mounting and removing SITOP UPS1100 battery modules.
Steps to connect the 24 V DC supply to the SITOP UPS1600 input terminals.
