To Next PageTo Next Page
Need help?Do you have a question about the Siemens SITOP PSE200U 3A and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | SITOP PSE200U 3A |
| Category | Power Supply |
| Language | English |
Details the function, benefits, and key features of the selectivity module.
Lists available device options, types, and corresponding order numbers.
Highlights critical safety warnings for operating electrical devices and handling.
Explains how the selectivity module distributes load current and monitors branches.
Details terminal connections for different SITOP models and their designations.
Explains the potentiometer for setting response thresholds and measuring output current.
Describes operating displays, group signaling contacts, status outputs, and remote reset.
Describes the reset button functions for SITOP select modules.
Details button functions and selector switch for SITOP PSE200U.
Explains manual output control and the latching behavior of manually switched-off outputs.
Details the shutdown characteristics and overload response for SITOP select.
Provides procedure to reset electronic overload shutdown using the reset button.
Details shutdown characteristics for SITOP PSE200U product versions.
Explains how to reset electronic shutdown using button or remote reset.
Describes using a remote reset signal to reset electronic overload shutdowns.
Explains programming the sequential switch-on delay for SITOP select.
Details the step-by-step procedure to set the switch-on delay time.
Explains how to set the sequential switch-on delay using the selector switch.
Illustrates block diagrams for different SITOP selectivity module models.
Provides dimensional drawings and weight specifications for SITOP modules.
Describes mounting requirements for SITOP modules in control cabinets and on rails.
Details the steps for mounting and removing the selectivity modules from mounting rails.
Specifies requirements for using the device in hazardous zones (Ex).
Details standard mounting on DIN rails and required clearances for ventilation.
Graphs showing output current derating based on temperature for different models in standard position.
Illustrates how installation altitude affects output current derating.
Discusses derating for non-standard mounting positions and notes on mechanical resistance.
Graphs showing output current derating for various mounting positions for 6EP1961-2BA00.
Graphs showing output current derating for various mounting positions for 6EP1961-2BA11/2BA31.
Graphs showing output current derating for various mounting positions for 6EP1961-2BA21/2BA41.
Emphasizes the risk of electric shock during installation and maintenance.
Details the connection of the 24 V DC power supply to the input terminals.
Explains how to connect loads to the output terminals of the selectivity module.
Details input voltage, range, overvoltage strength, and input current.
Provides output voltage, total tolerance, number of outputs, and current ratings.
Details the shutdown characteristics for SITOP select.
Details shutdown characteristics for SITOP PSE200U product versions.
Specifies efficiency and power loss at rated conditions for different models.
Details device protection, operating displays, and signaling methods.
Provides the Mean Time Between Failures rating for the selectivity modules.
Details connection system, dimensions, weight, and mounting.
Provides links for downloading CAD data for SITOP modules from the internet.
Lists safety standards (EN 60950-1, EN 50178) and protection class (Class III).
Details CE marking, degree of protection, UL/cUL, ATEX, and marine approvals.
Specifies compliance with EMC standards for emitted interference and noise immunity.
Specifies operating ambient temperature range and climatic class (3K3).
Details temperature and humidity requirements for transport and storage.
Describes vibration, shock testing, and resistance to damaging gases.
Covers atmospheric pressure limits for operation and storage, and altitude derating.
Confirms conformance with RoHS and use of non-silicon materials.
Provides instructions for recycling packaging and proper product disposal.
Lists contact methods (phone, email, online form) for technical support.
Provides links to operating instructions, manuals, SITOP homepage, and CAx data.
Directs users to the SITOP Selection Tool and Industry Mall for product selection and ordering.
Guides users to find their local Siemens contact person for product inquiries.
