Siemens SITOP PSE200U 3A

Overview
Selectivity modules
4 Manual, 12.2014, C98130-A7579-A1-1-7629
● Evaluation using free-of-charge SIMATIC S7 function blocks (S7-300/400/1200/1500) for
modules with single channel signal
● It can be selected that the load branches are sequentially switched on to reduce the total
inrush current
Ordering data
The following device options are available:
Selectivity modules
Type
Order number
SITOP select
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 2 ... 10 A with group signal contact
6EP1961-2BA00
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 0,5 ... 3 A with group signal contact
6EP1961-2BA11
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 3 ... 10 A with group signal contact
6EP1961-2BA21
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 0,5 ... 3 A with single channel signal
6EP1961-2BA31
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 3 ... 10 A with single channel signal
6EP1961-2BA41