To Next Page

To Previous Page

User´s Guide Power Rail Booster Version 12/2005

Power Rail Booster

Immunity to high-frequency discharge Testing following EN 61000-4-3:Frequency range 80

MHz - 1 GHz, test field intensity: 10 V/m at 80%

amplitude modulation with 1 kHz. Range 87 MHz

to108 MHz, 174 MHz to 230 MHz and 470 MHz to 790

MHz: 3V/m

Immunity to conducted interference Power and bus cables ± 2 kV (Burst) (EN61000-4-4)

Immunity to conducted interference (Surge) Power cables ± 1 kV symmetrical (Surge)

Bus cables ± 2kV unsymmetrical (EN61000-4-5)

Climatic service environment

Ambient temperature with preferred mounting 0 °C to +60 °C (IEC 68-2-1, IEC 68-2-2)

position

Ambient temperature with other mounting position 0 °C to +45 °C

Storage temperature –40 °C to +70 °C (IEC 68-2-14)

Relative humidity <95 %, no condensation (IEC 68-2-30)

Mechanical ambience conditions

Vibration during operation 10 to 58 Hz, 0,075 mm displacement;

58 to 150 Hz, 9,8 m/s 2 (1 g) acceleration

(IEC 68–2–6)

Vibration during transport 5 to 9 Hz, 3,5 mm displacement;

9 to 500 Hz, 9,8 m/s 2 (1 g) acceleration

Type of protection IP20

Dimensions 90,1x132x75 (WxHxD) with top hat rail 7,5 mm

90,1x132x82,5 (WxHxD) with top hat rail 15 mm

Preferred mounting position Horizontal installation on vertical wall

Weight 360g

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Siemens 6ES7 972-4AA02-0XA0 User Manual

Questions and Answers: