Need help?Do you have a question about the Siemens 6SL3210-1PE22-7AL0 and is the answer not in the manual?
General| Product Type | Control Unit |
|---|---|
| Model Number | 6SL3210-1PE22-7AL0 |
| Article Number | 6SL3210-1PE22-7AL0 |
| Number of encoder inputs | 2 |
| Number of digital inputs | 6 |
| Supply voltage | 24 V DC |
| Relative humidity | 5% to 95% (non-condensing) |
| Protection class | IP20 |
| Suitable for | SINAMICS S120 drive system |
| Communication Interface | PROFINET |
| Communication protocol | PROFINET |
| Control mode | Vector control |
| Storage temperature | -40°C to +70°C |
| Operating temperature | -10 to +50 °C |
Critical procedures to prevent serious accidents and electrical hazards.
Important precautions to avoid damaging the inverter during operation.
Information on power module block sizes, components, and frame types.
Procedures for connecting power circuits to the inverter.
Critical safety instructions for power wiring to prevent damage.
Rules for EMC-compliant wiring between motor and inverter.
Step-by-step instructions for establishing a webserver connection.
Key steps for successful inverter commissioning and self-learning.
Step-by-step guide to acknowledging and clearing faults.
To Next Page