Need help?Do you have a question about the Siemens 6SL3210-1PE21-8AL0 and is the answer not in the manual?
General| Product Brand Name | SINAMICS |
|---|---|
| Model Number | 6SL3210-1PE21-8AL0 |
| Input Voltage | 24 V DC |
| Digital Inputs | 6 |
| Analog Inputs | 2 |
| Analog Outputs | 2 |
| Power Supply Voltage | 24 V DC |
| Protection Class | IP20 |
| Product Designation | Control Unit |
| Control Type | Servo control |
| Communication | PROFINET |
| Interface Type | PROFINET |
| Relative Humidity | 5% to 95%, non-condensing |
Critical safety rules to prevent serious accidents and equipment damage.
Procedures to avoid damaging the inverter during operation and storage.
Details Blocksize format and components of PM240-2 Power Module.
Warnings and cautions for handling braking resistors to prevent fire and burns.
Overview of the CU310-2 PN controller for Siemens drives.
Safety warnings for the CU310-2 PN regarding ventilation clearances.
Rules for connecting power supply and output terminals correctly.
Safety rules related to power wiring to prevent damage and hazards.
Guidelines for EMC-compliant wiring between motor and inverter.
Detailed wiring diagram for the S120 Control Unit, highlighting connections.
Steps to connect to the inverter via Webserver using a browser.
Procedures for inverter self-learning and calibration for optimal performance.
Steps to acknowledge and clear faults from the inverter.
List of error codes, causes, and solutions for troubleshooting.
To Next Page