Need help?Do you have a question about the Siemens 6SL3210-1PE27-5AL0 and is the answer not in the manual?
General| Product Type | Control Unit |
|---|---|
| Model Number | 6SL3210-1PE27-5AL0 |
| Product Brand Name | Siemens |
| Product Category | SINAMICS |
| Supply Voltage | 24 V DC |
| Number of Digital Inputs | 6 |
| Number of Analog Inputs | 2 |
| Degree of Protection | IP20 |
| Relative Humidity | 5% to 95% (non-condensing) |
| Firmware Version | V4.7 |
| Communication Interface | PROFINET |
| Communication Protocol | PROFINET IO |
| Operating Temperature | -10 to +50 °C |
| Storage Temperature | -40 to +70 °C |
Procedures to prevent the risk of serious accidents.
Procedures to avoid damaging the inverter.
Description of the PM240-2 Power Module block sizes and components.
Safety warnings regarding ventilation and installation clearances.
Technical data for PM240-2, FSB (3 AC 380 ... 480 V ±10%).
Technical data for PM240-2, FSC (380 V ... 480 V 3 AC ±10%).
Technical data for PM240-2, FSD (3 AC 380 V to 480 V ±10%).
Technical data for PM240-2, FSE (3 AC 380 V to 480 V ±10%).
Technical data for PM240-2, FSF (3 AC 380 V to 480 V ±10%).
Safety warnings related to fire and burns from braking resistors.
Technical data for braking resistors for PM240-2 modules.
Description of the CU310-2 PN Control Unit and its functions.
Safety warnings for the Control Unit related to ventilation and parameterization.
Table detailing power circuit connections for the inverter.
Safety instructions related to power wiring and connections.
Rules for correct EMC compliant motor and inverter wiring.
Diagram for executing wiring for the inverter Control Unit.
Steps for inverter commissioning and self-learning.
Adjusting values for elevator system configuration.
To Next Page