Need help?Do you have a question about the Siemens 6SL3210-1PE21-4AL0 and is the answer not in the manual?
General| Article number | 6SL3210-1PE21-4AL0 |
|---|---|
| Number of Digital Inputs | 6 |
| Number of Analog Inputs | 2 |
| Analog inputs | 2 |
| Safe Torque Off (STO) | Yes |
| Safe Stop 1 (SS1) | Yes |
| Supply voltage | 24 V DC |
| Relative humidity | 5% to 95% (non-condensing) |
| Protection class | IP20 |
| Product type | Control Unit |
| Control mode | Vector control, servo control |
| Communication Interface | PROFINET |
| Communication | USS, Modbus RTU |
| Digital inputs | 6 |
| Interface | USS, Modbus RTU |
| Storage temperature | -40 to +70 °C |
Procedures to prevent serious accidents during inverter operation.
Procedures to avoid damaging the inverter during operation.
Description of the PM240-2 Power Module and its components.
Safety guidelines for ventilation and installation clearances.
Technical specifications for PM240-2, FSB Power Modules.
Safety guidelines for braking resistors, covering fire and burn risks.
Technical data for braking resistors used with PM240-2 modules.
Description of the CU310-2 PN Control Unit and its interfaces.
Safety guidelines for the Control Unit regarding ventilation and parameterization.
Technical data for the CU310-2 PN Control Unit.
Table detailing power circuit connections for inverter, motor, and resistor.
Safety instructions related to power connections.
Rules for wiring to ensure EMC compliance.
Steps for inverter commissioning, including self-learning.
Procedure for testing the rupture valve.
To Next Page