Electrical Connection
[le_P85x_electrical connection, 1, --_--]
Figure 9-4
Electrical Connection
(1) Terminal block H for power supply
(2) Terminal block F for voltage measurement
(3) Terminal block E for current measurement
(4) Terminal block G for binary output
NOTE
Be aware of the safety instruction in chapter Safety Notes, Page 188.
Power Supply
Connect the cables of the supply voltage on the terminal side of the device at terminal block H as follows:
Supply from the Alternating Voltage System
Terminal N/-: Neutral phase of the supply voltage
Terminal L/+: Phase of the supply voltage
Terminal Earthing: Protective grounding terminal
9.5
Commissioning and First Steps
9.5 Electrical Connection
196 SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
To Next Page
Loading...
