Siemens 7KG85 Series - Value View Via Display; Clearing of Min;Max Values; AC Power and Energy; Function Description

Value View via Display
Submenu Various Measured Quantities
•
Voltage Vph-n, Voltage Vph-ph
•
Current I
•
Power factor PF, Tot. Pwr.factor PF tot
•
cos φ
•
Frequency f
[dw_ac_power, 1, en_US]
Figure 2-16 Submenu Various Measured Quantities
Clearing of Min/Max Values
To clear the min/max values in the Maintenance tab, proceed as follows:
•
In the navigation window, click Min/Max values.
[sc_clear_Min_Max_values, 1, en_US]
Figure 2-17 Maintenance Tab, Clear Min/Max values
•
Enter the maintenance password (refer to Table 2-4).
•
Click Clear Min/Max values.
The min/max values are cleared. The Action was successful indication is displayed on the status bar.
AC Power and Energy
Function Description
Following AC power and energy values are gathered during measurement and shown both on the Web pages
and numerically on the display:
•
Power values P, Q, Q1, S
•
Energy values WP (imp, exp), WQ (imp, exp, ind, cap), WS
•
Frozen energy (for more information, refer to 5.2 Energy Freeze )
2.5.5.3
2.5.5.4
2.5.6
2.5.6.1
Basic Functions
2.5 AC Measurement
SICAM, SICAM P850/P855 7KG85X, Manual 59
E50417-H1040-C482-A9, Edition 03.2022