Model Designations and Specifications UMSITRPDS3-1
November 2010
9-24
9.5 MODELS 7MF4633 AND 7MF4812, LEVEL
This section contains a dimension drawing of the transmitter, a model designation table and performance
specifications.
1
2
3
4
Process connection of low pressure side ¼ -18NPT
Mounting thread M10, M12 or 7/16 –20 UNF
Blanking plug
Electrical connections:
Cable gland Pg 13.5 (with adapter)
M20 x 1.5 or ½ - 14 NPT or
Han 7D/Han 8 U Plug
5
6
7
8
Connection side
Electronics side, digital display (greater length for
cover with window)
Access cover over magnetic pushbuttons
Sealing screw with vent shown (optional)
This Figure is for Models 7MF4633 and 7MF4812.
FIGURE 9-5 Models 7MF4633 and 7MF4812, Dimensions
To Next Page
Loading...
