7XR6004 English
C53000-B119U-C137-1 11
Recommended cable lugs series PIDG of Messrs. Tyco Electronics AMP, e.g.
ring-type cable lug PIDG PN 320565–0,
fork-type cable lug PIDG PN 321233–0.
Direct connection with solid bare wire or flexible wire with end sleeves;
for cross-section 0.5 mm
2
to 2.6 mm
2
; AWG 20 to AWG 14.
When using one single conductor, the conductor end must be inserted such that it will be
drawn into the contact cavity while tightening the screw.
Use copper conductors only!
Wire strip length solid bare wire 9 mm to 10 mm or 0.354 in to 0.394 in.
max. torque value 1.8 Nm or 16 in-lb.
To Next Page
Loading...
Need help?
General
