English 7XV5655-0BA00
10 / 53 C53000-G1176-C174-3
Features
Protocol detection according to EN 60870-5-101/103 and DIGSI protocol (similar to
IEC60870-5-103), UDP protocol with error detection and correction
A 10-Mbit Ethernet interface (10BaseT) to the 10/100 Mbit network.
RS232/RS485 (switchable port) or FO interface for data transfer.
Serial baudrate and data format to the terminal devices automatically set by the
application, e.g. DIGSI 4 at 2400 Bd to 57.6 kBd (115.2 kBd) with data formats 8N1,
8N2, 8E1.
Reset to default values (factory settings) with INIT button: 9600 baud, 8N1
DIP switch for RS232/RS485 selection and RS485 bus termination and FO idle state
Enhanced security possible with password protection
LED displays for operating voltage and data traffic are located on the front panel.
DIN rail module in the plastic housing with integrated wide-range power supply unit
(24 - 250 V DC and 60 - 230 V AC) permits connection to all common substation
batteries or AC power systems.
Protective conductor (PE) connection
Easy configuration with the configuration tool
To Next Page
Loading...
Need help?
General