Εnglish A5E02913274-01 Εnglish
8F-DI Ex NAMUR, 6ES7138-7FN00-0AB0
Product Information Leaflet
This product information leaflet contains important information
about the 8F-DI Ex NAMUR electronic submodule.
Characteristics
This electronic submodule is used to evaluate NAMUR
sensors; evaluate switched and unswitched mechanical
contacts.
The electronic submodule is plugged into the
TM-IM/EM or TM-EM/EM terminal submodule.
Further information
Further information about the electronic submodule is
provided in the ET 200iSP - Fail-Safe Modules manual.
Information about the ET 200iSP system and on the use in
hazardous areas is provided in the ET 200iSP manual.
This manual is available free-of-charge on the internet at:
http://www.siemens.com/automation/service&support
Maintenance
The electronic submodule is maintenance-free. If a repair is
necessary, the electronic submodule must be returned to the
following address:
Siemens AG, Elektronikwerk,
Östliche Rheinbrückenstr. 50, D-76187 Karlsruhe
Repairs may only be performed by the manufacturer.
To Next Page
Loading...
