CONFIGURATION
_________________________________________________________________________________________________________
2-6
SIG-QG-17-05 DECEMBER 2017
Version No.: A
3. The Laptop DHCP Configuration default setting is Server. To Configure the port to either a
client mode or to disable the port, press the ENTER key.
4. From the DHCP Configuration screen, select the desired mode using the navigation keys and
press the ENTER key.
For Laptop operation it is recommended to use the Server mode and
setting the laptop DHCP to Client.
5. In the Server mode the IP Address and Network Mask are pre-assigned from the factory and
cannot be changed.
To Next Page
Loading...
