Siemens Acuris - Troubleshooting

Troubleshooting
55
DE
EN
FR
IT
NL
VL
Use these tips to resolve simple issues.
Problem Possible solution
Sound is weak. Replace empty battery.
Clean earmold.
Increase volume.
Hearing instru-
ment emits whis-
tling sounds..
Reinsert the earmold until it fits
securely.
Decrease volume.
Clean earmold.
Sound is distorted Decrease volume.
Replace empty battery.
Clean earmold.
Hearing instru-
ment emits signal
tones.
Gently close battey compartment
completely.
Replace empty battery.
Hearing instru-
ment does not
work.
Turn hearing instrument on.
Gently close battery compartment
completely.
Replace empty battery.
Make sure battery is inserted cor-
rectly.
Power-on delay is active. Wait 18 sec-
onds and check again.
Consult your Hearing Care Professional if you encounter
further problems.
Troubleshooting