Siemens AEROGYR RWI65.02 - Setting and Configuration Levels; Accessing Settings and DIL Switch Configuration

CM2N3204E / 1.1999 Siemens Building Technologies
10/20 Landis & Staefa Division
After opening the front door, operating card 2 can be accessed: the 10 lines of the front
page (operating level 2) show the setting and display choices required for operation.
With the exception of lines 5 and 8, the values can be readjusted when operating level 2
is active.
Line 5 displays the actual setpoint of heating (black pointer).
After pressing button 5, the actual setpoint of cooling (no black pointer) is displayed.
When pressing both buttons at the top (lines 1 and 2) simultaneously for two seconds,
the time switch program level appears. The relevant text is on the reverse of operating
card 2.
Closing the front door automatically reactivates operating level 1.
AEROGYR RWI65.02
TM
1
2
3
4
5
6
7
8
9
10
1 2
345
Max. supply air temp.
Min. supply air temp.
Running mode
Data point number
Data point value
Comfort
Economy
Actual
Heating
Cooling
Cooling
Heating
Heating
Cooling
3204Z03E
Set point
1 Front door
2 Space for operating card 1 and Operating Instructions with normal operation data point list and description
of operating mode display 1 through 10 (operating level 2, line 8)
3 Cover with operating card 2 (front: operating level 2, rear: operating level 3)
4 Display window with ten lines
5 Function buttons to change the setpoints
The DIL switches for the configuration of the RWI65.02 are located behind the cover. To
view or change settings, the front door must be opened and the cover removed.
AEROGYR RWI65.02
TM
1
2
3
4
5
6
7
8
9
10
3204Z04
8
7
6
5
Y10 Y30
Y30
Y10 Y10
4
3
2
1
Test Run
8
7
6
5
4
3
2
1
Y30
Y30 Y10
Y30 Y30
The controller is supplied with the DIL switches set to OFF. The switch positions have
the following meaning:
Setting level (operating
level 2) and time switch
program level (operating
level 3)
Front door open
Legend
Configuring the unit with
DIL switches
Front door opened, cover
removed