Need help?Do you have a question about the Siemens AVS75.390 and is the answer not in the manual?
General| Supply Voltage | 230 V AC |
|---|---|
| Gas Valve Control | Yes |
| Input voltage | 230 V AC |
| Protection class | IP40 |
| Frequency | 50 Hz |
| Flame Detection | Ionization or UV |
| Safety Time | 3 s |
| Pre-purge Time | 30 seconds |
| Application | Gas burners |
| Output current | 2 A |
| Operating temperature | -20 to +60 °C |
| Weight | 500 g |
Outlines conditions for product use and limitations on liability.
Outlines steps for commissioning the controller, including prerequisites and checks.
Details how to assign operator actions to heating circuits.
Details various functions adjustable per heating circuit.
Details how the heating curve influences flow temperature based on outside conditions.
Explains how to define a range for the flow temperature setpoint.
Describes compensation variants for room temperature influence.
Explains how to deactivate the cooling circuit pump based on room temperature.
Covers optimization of temperature level changes for comfort setpoint.
Details mixing valve boost, actuator type, and running time.
Explains how the function controls flow temperature for floor drying.
Covers DHW temperature control, priorities, and legionella function.
Covers priority settings for DHW charging over space heating.
Explains settings for the legionella function to prevent bacteria growth.
Provides function diagrams and component designations for heat pumps.
To Next Page