Siemens AVS75.390 - Display Choices; Selecting Space Heating Mode

36/221
Siemens Switzerland Ltd User manual RVS61.843 CE1U2355en_02
HVAC Products 5 Handling 23. November 2007
Display choices
Heating to the Comfort setpoint
Holiday function active
Heating to the Reduced setpoint
Reference to heating circuit
Heating to the frost protection setpoint Service / special functions
Cooling
Error messages
Process running – please wait
Info level activated
Change battery
Programming activated
Heating temporarily switched
off
ECO function active
Display of all segments.
2358Z07
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
Selecting space heating mode
This button is used to switch between the different
operating modes. The selection made is indicated by a
bar which appears below the respective symbol.
Automatic mode
Automatic operation controls the room temperature according to the time program.
Characteristics of automatic mode:
− Heating mode according to the time program
− Temperature setpoints according to the heating program "Comfort setpoint" or
"Reduced setpoint"
− Protective functions active
− Automatic summer / winter changeover (ECO functions)
Continuous operation
or
Continuous operation maintains the room temperature at the selected operating level.
Heating to the Comfort setpoint
Heating to the Reduced setpoint
Characteristics of continuous operation:
• Heating mode with no time program
• Protective functions active
• Automatic summer / winter changeover (ECO functions) and 24-hour heating limit
inactive in the case of continuous operation with the Comfort setpoint
Display