Siemens BH17 7ER - Figure 1 - Marking out Diamond Loops; Figure 2 - Table of Dimensions for Diamond Loops

LOOP DETECTOR HANDBOOK
667/HE/20663/000 Issue 13 Page 20
Figure 1 - Marking out Diamond Loops
(Use for replacement or MOVA only)
See Figure 21 for distance from stop line.
Figure 2 - Table of Dimensions for Diamond Loops
(Use for replacement or MOVA only)
Distance between Datum
Point and End Point within
the range
Loop Configuration
Example
1.2 – 3.6 metres
3.7 – 7.2 metres
7.3 – 10.8 metres
10.9 – 14.4 metres
Single
Double
Triple
Quad
◊
◊◊
◊◊◊
◊◊◊◊