15Getting started
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
right page (15) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
Getting started
Inserting the
SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Press and hold down the catch
1,
then push cover towards the front
in the direction indicated by the
arrow
2.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then press the
SIM card slightly to push it in
3
(ensure that the chamfered corner
is in the correct position).
• Insert the battery sideways into
the phone
4, then press it down-
wards
5 until it engages.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
Additional information
Please switch off your phone before re-
moving the battery!
Only 3 V SIM cards are supported. Please
contact your service provider if you have an
older card.
SIM card problems .....................page 126
1
2
3
4
5
To Next Page
Loading...
