Siemens C75 - Connectivity

Settings94
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Connectivity.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
left page (94) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
Connectivity
C
¢T¢Connectivity
¢Select function.
GPRS b
(General Packet Radio Service)
C Switch GPRS on/off
GPRS is a new method for transmit-
ting data faster in the mobile net-
work. Use GPRS and if the network
has sufficient capacity, you can be
connected to the Internet perma-
nently. Only the actual transmission
time is charged by the network oper-
ator. Some service providers do not
yet support this service.
Shown in the display:
£
Activated and available.
¢
Registered.
¤
Temporarily interrupted.
GPRS info
Display of information on connec-
tion status.
IrDA
Your phone has an infrared inter-
face. With this interface, you can ex-
change data such as pictures, ring-
tones, Addressbook entries,
business cards or organiser data with
other appliances which also have an
infrared interface.
The infrared interface is on the right
side of the phone. The distance be-
tween the two devices must not ex-
ceed 30 cm. The infrared windows in
both appliances must be aligned as
accurately as possible with each
other.
Shown on the display:
¯ Infrared activated.
®
During transmission.
Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as MMS, WAP.
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.