Siemens CB734G1 1 Series - 5 Operating modes; 5.1 Types of heating

Operating modes en
7
4.4 Cooking compartment
Various functions in the cooking compartment provide
support when operating your appliance.
Shelf supports
The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→"Accessories", Page8
Your appliance has 3 shelf positions. The shelf posi-
tions are numbered from bottom to top.
You can remove the shelf supports, e.g. for cleaning.
→"Rails", Page23
Self-cleaning surfaces
The back panel in the cooking compartment is self-
cleaning. The self-cleaning surfaces are coated with a
porous, matt ceramic layer and have a rough surface.
When the appliance is in operation, the self-cleaning
surfaces absorb splashes from roasting or grilling and
break them down.
If the self-cleaning surfaces no longer clean themselves
adequately during operation, heat up the cooking com-
partment specifically to the right temperature.
→"Regenerating self-cleaning surfaces in the cooking
compartment", Page19
Lighting
One or more oven lights illuminate the cooking com-
partment.
When you open the appliance door, the light in the
cooking compartment switches on. If the appliance
door remains open for longer than around 18 minutes,
the light switches off again.
For most operating modes, the lighting is switched on
during operation. The lighting switches off again when
the operation ends.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
ATTENTION!
Covering the ventilation slots will cause the appliance
to overheat.
▶ Do not cover the ventilation slots.
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Appliance door
If you open the appliance door during operation, the
operation stops. If you close the appliance door, opera-
tion resumes automatically.
5 Operating modes
This is where you can find an overview of your appli-
ance's operating modes and main functions.
Tip:Depending on the appliance type, additional or
more comprehensive functions are available to you
with the HomeConnect app. You can find more inform-
ation about this in the app.
Operating
mode
Use
Types of
heating
Select finely tuned types of heating for
the optimal preparation of your food.
→"Types of heating", Page7
→"Basic operation", Page10
Dishes Use programmed, recommended set-
tings for various types of food.
→"Dishes", Page13
Operating
mode
Use
Cleaning Select the cleaning function for the
cooking compartment.
→"Cleaning aid 'humidClean'",
Page19
Favourites Use your own saved settings.
→"Favourites", Page14
Home Con-
nect
Connect and remotely control the oven
with a mobile end device, and use the
full functionality of the appliance.
→"HomeConnect ", Page15
Basic set-
tings
Open the basic settings.
5.1 Types of heating
To ensure that you always find the right type of heating
to cook your food, we explain the differences and ap-
plications below.
The symbols for each type of heating help you to re-
member them.
When you select a type of heating, the appliance sug-
gests a suitable temperature or setting. You can use
these values or change them within the specified
range.
For temperature settings above 275°C and grill set-
ting3, the appliance reduces the temperature to ap-
prox. 275°C or grill setting1 after approx. 40minutes.