4 | P u s l a p i s
Pic. 3 Login screen
User password is 1000 and it can be entered by “Up” and “Down” buttons and confirm selection
press „Enter“. When correct password is entered in the right corner one key icon will be showed.
On User Level user can change “Setpoint” and turn on/off machine from display in line
“Display/Comm:
1.1.2 Connecting to service profile
Connect to “Service” profile. Hold “Enter” button for 3 seconds.
Pic. 4 Button placement
After 3 seconds screen changes to Pic. 5.
To Next Page
Loading...
