Siemens CLIMATIX C400 - Alarm List; Web Service Access

5 | P u s l a p i s
SIEMENS CLIMATIX
Pic. 5 Login screen
User password is 2000 and it can be entered by “Up” and “Down” buttons and confirm selection
press „Enter“. When correct password is entered in the right corner two key icon will be showed.
In service level parameters for regulation and alarms can be changed.
1.1.3 Alarm list
AL01
Fan overload
AL02
DryCoolerIn Temp. sensor fault
AL03
DryCoolerOut Temp. sensor fault
AL04
Fault Supply pump (Single pump)/ Fault Supply pump 1 (Twin
pump)
AL05
Fault Flow Detector (Single pump)
AL06
Fault Supply pump 2 (Twin pump)
AL07
Fault Flow Detector (Twin pump)
AL08
Outside temp. sensor fault
AL09
Fault Adiabatic pump
AL10
Fault flow switch adiabatic pump
Most recent alarm will be showed on HMILED. Alarm history can be reached by Hold “SET” key for
5s then screen will change and show “PL” press “UP” key and it changes to ALH and alarm history
is showed.
1.2 Web service access
For reaching internet access find IP:
POL871.72/STD Main menu->System->Communications
Enter found IP address to browser and should see Authentication required window: