Siemens CPU 314C-2 PtP

&RPPLVVLRQLQJ
S7-300 Automation System, Hardware and Installation: CPU 31xC and CPU 31x
9-12 A5E00105492-03
 ,QLWLDO3RZHU2Q
5HTXLUHPHQWV
• You must have installed and wired up the S7-300.
• The MMC is inserted in the CPU.
• Your CPU's mode selector switch must be set to STOP.
,QLWLDOSRZHUXSIRUD&38ZLWKPLFURPHPRU\FDUG00&
Switch on the PS 307 power supply module.
5HVXOW
• The 24 VDC LED on the power supply module is lit.
• The 5 VDC LED on the CPU
– is lit.
– The STOP LED flashes at 2 Hz when the CPU executes an automatic
memory reset.
– The STOP LED is lit after memory reset.