Siemens CPU 315-2 DP Reference Manual

A-1
PLC S7-300, CPU Specifications CPU 312 IFM to CPU 318-2 DP
A5E00111190-01
Standards, Certificates and Approvals
Introduction
This Appendix provides the following information on the S7-300 modules and
components:
 The most important standards and criteria met by S7-300 and
 Approvals that have been granted for the S7-300.
IEC 1131
The S7-300 programmable controller meets the requirements and criteria to
standard IEC 1131, Part 2.
CE Symbol
Our products meet the requirements and protection guidelines of the following EC
Directives and comply with the harmonized European standards (EN) issued in the
Official Journal of the European Communities with regard to programmable
controllers:
 89/336/EEC “Electromagnetic Compatibility” (EMC Directive)
 73/23/EEC “Electrical Equipment Designed for Use between Certain Voltage
Limits” (Low-Voltage Directive)
The declarations of conformity are held at the address below, where they can be
obtained if and when required by the respective authorities:
Siemens Aktiengesellschaft
Automation Group
A&D AS RD 4
P.O. Box 1963
D-92209 Amberg Federal Republic of Germany
A

Siemens CPU 315-2 DP Specifications

General

Memory	64 KB
Power Supply	24 V DC
Order Number	6ES7 315-2AG10-0AB0
Number of DP Masters	1
Number of DP Slaves	124
Load Memory	64 KB
Number of Timers	256
Number of Counters	256
Data Memory	64 KB
Operating Temperature	0 to 60 °C
Integrated Interfaces	MPI, DP
Digital Outputs	Not integrated
Analog Inputs	Not integrated
Analog Outputs	Not integrated
Programming Languages	LAD, FBD, STL
Digital Inputs	Not integrated
Weight	660 g