Siemens CPU 315-2 DP Reference Manual

Standards, Certificates and Approvals
A-2
PLC S7-300, CPU Specifications CPU 312 IFM to CPU 318-2 DP
A5E00111190-01
EMC Guidelines
SIMATIC products are designed for industrial use.
Area of Application Requirements:
Emitted
interference
Immunity
Industry EN 50081-2 : 1993 EN 50082-2 : 1995
If you use the S7-300 in residential areas, you must ensure emission of radio
interference complies with Limit Class B as per EN 55011.
The following measures can be taken to achieve compliance with Limit Class B:
 Install the S7-300 in an earthed control/switch cabinet
 Fit filters to supply lines
UL Recognition
UL Recognition Mark
Underwriters Laboratories (UL) to
UL standard 508, Report 116536
CSA Certification
CSA-Certification-Mark
Canadian Standard Association (CSA) to
Standard C22.2 No. 142, File No. LR 48323
FM Approval
FM Approval to Factory Mutual Approval Standard Class Number 3611, Class I,
Division 2, Group A, B, C, D.
!
Warning
Personal injury or property damage can result.
In hazardous areas, personal injury or property damage can result if you withdraw
any connectors while an S7-300 is in operation.
Always isolate the S7-300 in hazardous areas before withdrawing connectors.

Siemens CPU 315-2 DP Specifications

General

Memory	64 KB
Power Supply	24 V DC
Order Number	6ES7 315-2AG10-0AB0
Number of DP Masters	1
Number of DP Slaves	124
Load Memory	64 KB
Number of Timers	256
Number of Counters	256
Data Memory	64 KB
Operating Temperature	0 to 60 °C
Integrated Interfaces	MPI, DP
Digital Outputs	Not integrated
Analog Inputs	Not integrated
Analog Outputs	Not integrated
Programming Languages	LAD, FBD, STL
Digital Inputs	Not integrated
Weight	660 g