Functions
Connect X200 provides two integration levels for connecting devices to the cloud: System in-
tegration (between the Connect X200 and the devices) and cloud integration (between the
Connect X200 and the cloud).
A broad range of devices can be integrated on the system level (i.e. Desigo, FS20, third-
party systems). Connect X200 supports various protocols (BACnet, Modbus,) and different
media (Ethernet, serial EIA-485 bus).
The device supports Ethernet and 4G on the cloud level via the MQTT protocol.
The specific set of supported functions may vary according to the region (for example UL
markets) and according to the connected system. Detailed information about the latest sup-
ported functions can be found in the release notes of the installed software.
Application
Connect X200 is a physical device that is the connecting point between the cloud and con-
trolled/monitored devices, such as controllers, sensors, and actuators in the building.
The device integrates common BACnet/IP or Modbus/TCP devices and systems as well as
Siemens fire system protocols.
It securely transmits data to the cloud over cable networks or over mobile networks (e.g. 4G:
With a router). 4G USB Dongle support is available in addition (see “Accessories”).
Type summary
Please confirm compatibility of the chosen 4G Dongle according to the infrastructure of your
regional Internet Service Provider before choosing and ordering a specific device (i.e. com-
patibility of regional 4G frequency bands). Consult “4G Dongle Commissioning Guide” for
further instructions and information.
To Next Page
Loading...
