Siemens CXG3.X200 User Manual

Connect X200
CXG3.X200
Connect X200 for the cloud integration of Siemens Smart infrastructure as well
as third-party systems
● 2-port Ethernet switch for LAN (incl. Daisy Chaining)
● 1-port Ethernet for WAN
● 2 EIA-485 interfaces
● USB interface for 4G dongles
● Operating voltage AC 24 V or DC 24 V
● Mounting on standard rails or on the wall
● Plug-in screw terminal blocks
● Multi-site management (depending on firmware)
● Remote operation & monitoring (depending on firmware)
● Alarm treatment (depending on firmware)
● Remote tool access, update and configuration via Siemens Cloud Services (de-
pending on firmware)
A6V11974867_en--_b
Smart Infrastructure
2021-08-30

Siemens CXG3.X200 Specifications

General

Brand	Siemens
Model	CXG3.X200
Category	Industrial Equipment
Language	English

Summary

Technical and Mechanical Design

LED Indicators

Overview of LED status lights for communication and device operation status.

Safety Information

National Safety Regulations

National safety regulations and precautions for installation and operation.

Mounting and Ambient Temperature

Guidelines for device mounting positions and permissible ambient temperatures.

Technical Data

Power Supply Specifications

Specifications for operating voltages (AC 24 V, DC 24 V) and grounding.

Power Consumption

Details on AC and DC power consumption for planning purposes.

Hardware and Data Backup

Specifications for processor, storage, and data backup capabilities.

Ethernet Interfaces

Details on Ethernet port types, bit rate, protocols, and cabling.

Screw Terminals and Connectors

Specifications for connecting wires to terminals and screw torque.

EIA-485 Interfaces

Specifications for EIA-485 serial communication ports.

USB Interface for 4G Dongles

Details on the USB port for 4G modem connectivity.

Ambient Conditions and Protection

Environmental operating conditions and housing protection ratings (IP).

Standards, Directives, and Approvals

Connection Terminals