To Next PageTo Next Page
Need help?Do you have a question about the Siemens DXR2.E10PL-102B and is the answer not in the manual?
General| Product type designation | DXR2.E10PL-102B |
|---|---|
| Manufacturer | Siemens |
| Number of physical outputs | 8 |
| Number of Outputs | 8 |
| Protection class | IP20 |
| Operating voltage | 24 V DC |
| Power Supply | 24 V DC |
| Input Voltage | 24 V DC |
| Output Voltage | 24 V DC |
| Outputs | Digital |
| Operating Temperature | 0°C to 55°C |
| Output Current | Max. 2 A per output |
Identify the size of the damper shaft (1/2-inch or 5/8-inch) for correct mounting.
Setting the damper rotation direction (clockwise or counterclockwise) for opening.
Instructions for using the manual switch and adjusting the lever position.
Procedure to close the damper and mark the shaft position.
Proper torque specifications for tightening the adjustment lever based on material.
Guidance on attaching the mounting bracket at an angle to avoid interference.
