Siemens EQ.7 - i Button and Settings; Adjusting the Grinding Unit

9
deen
j button and settings
Use the j button 7 to display information
(press briey) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
how many drinks have been dispensed
since the espresso machine was switched
on
when should the next service be
completed.
● Press the
j button 7 briey and navigate
with the < and > buttons 4.
inFo
descaLe aFter xxx cuPs
cLean aFter xxx cuPs
no FiLter
change FiLter in xxx cuPs *
inFo
no. oF coFFees xx
no. oF miLk mixes xx
amount hot Water xL
*appears only if the lter is activated.
Press the j button 7 again briey to return
to drink selection. If no button is pressed for
about 10 seconds the appliance
automatically switches back to drink
selection mode.
Adjusting settings
(see “Menu settings”).
–
–
Adjusting the grinding unit
The rotary selector 17 adjusts the grind
settings from coarse to ne.
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged.
● While the grinding unit is running, adjust
the rotary selector 17 from ne • • • to
coarse ● ● ● as required.
Note: The new setting will not become
apparent until after the second cup of
coffee.
Tip: For dark roast coffee beans, choose a
finer grind, for lighter beans a coarser grind.
Cup warming

! Warning: The cup warmer 18
becomes very hot.
The fully automatic espresso machine has a
cup warmer 18 that can be switched on or
off manually with button 19. When the cup
warmer 18 is on, the button 19 lights up.
Tip: For optimal cup warming, place the
base of the cups on the cup warmer 18.