Siemens FDA2 1 Series Mounting & Installation

4
Installation
'PreAlarm' relay output for pre-alarm
4.8 'PreAlarm' relay output for pre-alarm
Relay output for 'pre-alarm' alarm level.
Connection: n.o. (default setting)
Properties
 Activation occurs according to the chosen setting.
 The connection can be changed to 'n.c.' with the 'FXS2051 ASD Configuration
Tool' software. The chosen setting applies automatically to 'Inspect', 'Prealarm',
'Fire 1', 'Fire 2'.
4.9 'Fire 1' relay output for fire alarm 1
Relay output for alerting the fire brigade.
Connection: n.o. (default setting)
Properties
 Activation occurs according to the chosen setting.
 The connection can be changed to 'n.c.' with the 'FXS2051 ASD Configuration
Tool' software. The chosen setting applies automatically to 'Inspect', 'Prealarm',
'Fire 1', 'Fire 2'.
4.10 'Fire 2' relay output for fire alarm 2
Relay output for alarm level 2 to activate external extinguishing equipment.
Connection: n.o.
Properties
 Activation occurs according to the chosen setting.
 The connection can be changed to 'n.c.' with the 'FXS2051 ASD Configuration
Tool' software. The chosen setting applies automatically to 'Inspect', 'Prealarm',
'Fire 1', 'Fire 2'.
28
Building Technologies A6V10345654_h_en_--
Fire Safety 2015-05-29
firealarmresources.com

Siemens FDA2 1 Series Specifications

General

Brand	Siemens
Model	FDA2 1 Series
Category	Smoke Alarm
Language	English