Siemens FDA2 1 Series Mounting & Installation

4
Installation
Connection to input/output module
Interface Function
'GPI' Possible to reset an alarm or the status of the aspirating
smoke detector using the fire control panel
'Fault' A general fault is indicated on the fire control panel
'Prealarm' A pre-alarm is indicated on the fire control panel
'Fire 1' An alarm is indicated on the fire control panel
'Fire 2' Controls external extinguishing equipment
34
Building Technologies A6V10345654_h_en_--
Fire Safety 2015-05-29
firealarmresources.com

Siemens FDA2 1 Series Specifications

General

Brand	Siemens
Model	FDA2 1 Series
Category	Smoke Alarm
Language	English