Do you have a question about the Siemens FDCI222 and is the answer not in the manual?
Product type | I/O Module |
---|---|
Category | I/O Systems |
Number of Channels | 16 |
Input Voltage | 24 V DC |
Output Voltage | 24 V DC |
Protection Class | IP20 |
Communication Protocol | PROFIBUS |
Operating Temperature | -20 to +60 °C |
Relative Humidity | 5% to 95% (non-condensing) |
Details steps for fitting the module within a protective housing.
Instructions for mounting the module onto a standard top hat rail.
Steps to secure the module directly onto a flat surface.
Guide to connecting input module cables and resistors to terminals.
Describes monitoring of input lines for open circuit conditions only.
Describes monitoring of input lines for both short-circuit and open conditions.
Details for ordering the FDC1222 input module.
Details for ordering the FDCH221 housing.
Ordering information for the mounting foot accessory.
Details for ordering Rp 3k01 and Rs 1k15 resistors.