HART add-on module
5
3. Product overview
MAG/MASS 6000
All interfaces apply to the following specifications:
Manufacturer Siemens
Name:
Manufacturer ID 42 (2A hex)
code:
HART Protocol 5.2
revision:
Number of Device MAG = 3
Variables: MASS = 4
Physical layers support: FSK
Physical Device Category: Current output
Loop powered: No
CN 10
Device Type 24 = MAG5/6000 + variants
Codes: 25 = MASS 6000
Device Revision:2
This operating manual describes the HART interface for the electromagnetic flowmeter
MAG 5000 C, MAG 6000 and the coriolis flowmeter MASS 6000.
The MAG/MASS 6000 series is based on the flexible USM II technology. This includes the AOM
(Add-On-Module) that provides digital communications capabilities for the USM II transmitters.
This approach gives far more flexibility, and greater long-term protection of your signal converter
investment, than is possible with factory standard, off-the shelf signal converter designs.
With this easy to use system, providing additional functionality to the already impressive line-
up of standard features in your USM II transmitter is as easy as plugging in a small black box. You
have total control over
whether
to add anything at all,
what
it will be, and
when
to add it.
MAG/MASS 6000
The MAG 5000 C has a built-in HART interface, and cannot be mounted with new communication
modules.
3. Product overview
To Next Page
Loading...
