Siemens PM-D F DC24V PROFIsafe User Manual

SIMATIC Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
Preface
Product Overview
1
Configuring
2
Address Assignment and
Installation
3
Wiring and Fitting Modules
4
Diagnostics
5
General Technical
Specifications
6
Fail-Safe Modules
7
Diagnostic Data of Fail-Safe
Modules
A
Dimension drawings
B
Accessories and Order
Numbers
C
Response times
D
Connecting Loads
E
SIMATIC
Distributed I/O System Fail-Safe
Engineering
ET 200S Distributed I/O System -
Fail-Safe Modules
Installation and Operating Manual
08/2008
A5E00103686-07

Siemens PM-D F DC24V PROFIsafe Specifications

General

Brand	Siemens
Model	PM-D F DC24V PROFIsafe
Category	Control Unit
Language	English

Summary

Product Overview

1.3 Using ET 200S Fail-Safe Modules

Guidance on applying ET 200S fail-safe modules in F-systems.

1.4 Guide for Commissioning of ET 200S with Fail-Safe Modules

Step-by-step guide for commissioning ET 200S with fail-safe modules.

Configuring

2.1 Configuring ET 200S with Fail-Safe Modules

Example configuration of ET 200S with fail-safe modules.

2.2 Assigning Modules of an ET 200S

How to assign fail-safe power and electronic modules to terminal modules.

2.4 Configuration and Parameter Assignment

Procedures for configuring modules and assigning parameters in STEP 7.

Address Assignment and Installation

3.1 Address assignments in the F-CPU

Occupied address ranges for fail-safe modules in the F-CPU.

3.2 Assignment of the PROFIsafe address

Instructions for setting and assigning PROFIsafe addresses to modules.

3.3 Installing

Procedures and dimensions for installing fail-safe modules.

Wiring and Fitting Modules

4.2 Safe Functional Extra Low Voltage for Fail-Safe Modules

Requirements for safe functional extra-low voltage (SELV/PELV).

4.3 Wiring fail-safe modules

General wiring procedures and power supply requirements.

4.4 Insertion and removal of fail-safe modules

Conditions and procedures for inserting/removing modules during operation.

4.5 Requirements for Sensors and Actuators

Information on sensor and actuator compatibility and requirements.

Diagnostics

5.1 Reactions to Faults

5.2 Fault Diagnostics

Available diagnostic options and functions for fail-safe modules.

Channel-Specific Diagnostics

Possible Fault Types of Fail-Safe Modules