Siemens 4 F-DI/3 F-DO DC24V PROFIsafe User Manual

SIMATIC Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
Preface
Product Overview
1
Configuring
2
Address Assignment and
Installation
3
Wiring and Fitting Modules
4
Diagnostics
5
General Technical
Specifications
6
Fail-Safe Modules
7
Diagnostic Data of Fail-Safe
Modules
A
Dimension drawings
B
Accessories and Order
Numbers
C
Response times
D
Connecting Loads
E
SIMATIC
Distributed I/O System Fail-Safe
Engineering
ET 200S Distributed I/O System -
Fail-Safe Modules
Installation and Operating Manual
08/2008
A5E00103686-07

Siemens 4 F-DI/3 F-DO DC24V PROFIsafe Specifications

General

Brand	Siemens
Model	4 F-DI/3 F-DO DC24V PROFIsafe
Category	Control Unit
Language	English

Summary

Product Overview

Availability of Fail-Safe Modules

Lists available fail-safe electronic modules and interface module compatibility for ET 200S.

Achievable Safety Classes

Details the safety classes achievable with fail-safe modules based on IEC, EN, and ISO standards.

1.4 Guide for Commissioning

Provides a step-by-step guide for commissioning ET 200S with fail-safe modules.

Configuring

2.1 Configuring ET 200S with Fail-Safe Modules

Explains how to configure ET 200S with fail-safe modules, including examples and rules.

2.2 Assigning Modules

Details assignments of fail-safe power and electronic modules to terminal modules and motor starters.

2.3 Maximum Configuration

Covers maximum number of connectable modules, parameter lengths, and configuration limits.

2.4 Configuration and Parameter Assignment

Address Assignment and Installation

3.1 Address assignments in the F-CPU

3.2 PROFIsafe Address Assignment

Wiring and Fitting Modules

4.3 Wiring Fail-Safe Modules

4.4 Module Insertion and Removal

4.5 Sensor and Actuator Requirements

Diagnostics

5.1 Reactions to Faults

5.2 Fault Diagnostics

Channel-Specific Diagnostics

General Technical Specifications

6.2 Standards and Approvals

6.3 Electromagnetic Compatibility

6.5 Mechanical and Climatic Environmental Conditions

6.6 Voltage, Protection Class, and Type of Protection

Fail-Safe Modules

7.2 PM-E F pm DC24V PROFIsafe Power Module

Details properties, digital outputs, power supplies, safety shutdown, terminal assignment, wiring, parameters, diagnostics, and technical specifications.

7.3 PM-E F pp DC24V PROFIsafe Power Module

Covers properties, voltage bus switching, power supplies, safety shutdown, terminal assignment, wiring, parameters, diagnostics, and specifications.

7.4 PM-D F DC24V PROFIsafe Power Module

Details properties, safety class conditions, terminal assignment, wiring, parameters, diagnostic functions, and technical specifications.

7.5 4/8 F-DI DC24V PROFIsafe Digital Electronic Module

Describes properties, power modules, terminal assignment, wiring, parameters, applications, diagnostic functions, and technical specifications.

7.6 EM 4 F-DI/3 F-DO DC24V PROFIsafe digital electronic module

Details properties, power modules, loads, capacitance, assignment, wiring, parameters, applications, diagnostics, and specifications.

7.7 4 F-DO DC24V/2A PROFIsafe digital electronic module

Covers properties, power modules, loads, capacitance, terminal assignment, wiring, applications, parameters, diagnostics, and specifications.

7.8 1 F-RO DC24V/AC24..230V/5A Digital Electronic Module

Details properties, terminal assignment, wiring diagrams, power supply, load connection, relay contacts, diagnostics, and technical specifications.

Diagnostic Data of Fail-Safe Modules

A.2 Structure and Content of Diagnostic Data

Data Records 0 and 1

Channel-Specific Diagnostics from Byte 8

Channel-Specific Diagnostics in Bytes 28 to 43

Dimension drawings

Terminal Modules with F-Module Inserted

Accessories and Order Numbers

Response times

Maximum Response Times for Modules

Connecting Loads

E.1 Connecting capacitive loads

E.2 Switching inductive loads