To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC ET 200SP F-AI 4xI 0(4) 20mA 2-/4-wire HF Series and is the answer not in the manual?
General| Input channels | 4 |
|---|---|
| Wiring type | 2-/4-wire |
| Series | SIMATIC ET 200SP |
| Supply voltage | 24 V DC |
| Rated value (DC) | 24 V |
| Power loss, typ. | 1.5 W |
| Interference voltage suppression for interference frequency f1 in Hz | 50/60 Hz |
| Diagnostics function | Yes |
| Galvanic isolation | Yes |
| Potential separation channels | Yes |
| Potential separation between the channels and backplane bus | Yes |
| Module type | AI |
| Safety integrity level | SIL 3 |
| Connection method | Push-in terminals |
| Operating voltage | 24 V DC |
| Weight | 200 g |
| Input current range | 0(4)..20 mA |
| Product type designation | F-AI 4xI 0(4)..20mA 2-/4-wire HF |
| Analog value generation for the inputs | 16 bits |
| Resolution | 16 bit |
| Integration time/resolution per channel | Configurable |
Explains the aim and scope of the manual.
Defines terms and symbols used in the documentation.
Outlines the documentation structure and general topics covered.
Details module-specific information like properties and diagrams.
Illustrates the module's terminal assignments and internal connections for wiring.
Lists available measurement types and their corresponding ranges.
Introduces configurable parameters for the analog input module.
Details a specific application scenario for safety mode SIL3/Cat.3/PLd.
Explains the meaning of the LED indicators on the module.
Provides general details such as article number and firmware version.
Specifies the rated and permissible DC supply voltage ranges.
Defines how response times are calculated for fail-safe analog inputs.
Explains how to calculate the typical response time using a formula.
Describes the resolution and format of analog values.
