Need help?Do you have a question about the Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF and is the answer not in the manual?
General| Product Type | Interface module |
|---|---|
| Interface | PROFINET |
| Protocol | PROFINET IO |
| Mounting Type | DIN rail |
| Power Supply | 24 V DC |
| Weight | 200 g |
| Firmware Version | V4.2 |
| CiR (Configuration in Run) Function | Yes |
| Number of Possible IO Modules | 64 |
| Web Server | Yes |
| IRT | Yes |
| MRP | Yes |
| Data Transmission Rate | 100 Mbps |
| Degree of Protection | IP20 |
| Engineering with | STEP 7 (TIA Portal) |
| Protocols | PROFINET IO |
| Operating Temperature | -20 °C to +60 °C |
Describes the purpose and scope of this manual for the ET 200SP system.
Explains symbols and notes used throughout the manual for clarity and emphasis.
Details Siemens' approach to industrial security and recommendations for protecting systems against cyber threats.
Provides an overview of the documentation structure and available function manuals.
Describes the content of product manuals for specific ET 200SP modules.
Refers to the ET 200SP system manual and TIA Portal online help for system configuration.
Lists the technical specifications and capabilities of the IM 155-6 PN/2 HF interface module.
Details the various PROFINET IO and additional functions supported by the interface module.
Shows the signal names and descriptions for the 24 V DC supply voltage connections.
Presents a visual representation of the IM 155-6 PN/2 HF interface module's internal structure.
Lists configurable parameters for the IM 155-6 PN/2 HF interface module in the GSD file.
Provides detailed descriptions for configuration control and diagnostics parameters.
Defines how outputs behave when triggered by specific events like controller stop or failure.
Explains the meaning of the LED indicators on the interface module and BusAdapter for status and errors.
Describes how the I/O device triggers interrupts and how they are evaluated by the I/O controller.
Covers diagnostic alarms, maintenance events, and channel diagnostics for error reporting.
Details the compatibility between different interface module versions and the ET 200SP system.
Presents general technical data like article number, firmware version, and product functions.
Lists key product functions such as I&M data, hot swapping, and docking station support.
Specifies software requirements and configuration methods for STEP 7 and PROFINET.
Details the rated supply voltage, permissible ranges, and reverse polarity protection.
To Next Page