Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF - Functions

Product overview
2.2 Functions
Interface module IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0)
16 Manual, 10/2018, A5E03915895-AH
2.2
Functions
Introduction
The interface module supports the following PROFINET IO functions:
● Integrated switch with 2 ports
● Supported Ethernet services: PING, ARP, SNMP, LLDP
● Port diagnostics
● Disabling ports
● Minimum update time 250 µs
● Device replacement without programming device, also without topological configuration
● Reset to factory settings via PROFINET IO or RESET button
● Firmware update via PROFINET IO
● Isochronous real-time communication
● Prioritized startup
● Media redundancy (MRP)
● Shared device
● Distribution of module channels to a maximum of 4 submodules
● Module-internal or submodule-internal Shared Input/Shared Output (MSI/MSO)
● Isochronous mode
● System redundancy S2
● Station extension via ET-Connection
● Alternating IO devices during operation ("docking systems")
– Docking station
– Docking unit
● Supports BusAdapter for different connection technologies to PROFINET IO.
The interface module supports additional functions:
● Identification data I&M 0 to I&M 4
● PROFIenergy
● Configuration control (option handling)
● Use of fail-safe modules
● Removal/insertion of multiple I/O modules during operation (Multi Hot Swap)
● Module-to-Module Communication (MtM)