Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF - Wiring; Pin assignment

Interface module IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0)
30 Manual, 10/2018, A5E03915895-AH
Wiring
3
3.1
Pin assignment
24 V DC supply voltage
The following table shows the signal names and the descriptions of the pin assignment for a
24 V DC supply voltage.
Table 3- 1 Pin assignment 24 V DC supply voltage
View
Signal name
1
Description
Connector
IM connection
1L+
24 V DC (SELV/PELV)
2L+ 24 V DC (for looping through)
2
1M
Ground
2M Ground (for looping through)
2
1
1L+ and 2L+ as well as 1M and 2M are bridged internally.
2
Maximum 10 A permitted.
Reference
You can find more information on accessories and how to connect the interface module in
the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.