Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF - Parameters;address space; Parameters

Interface module IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0)
32 Manual, 10/2018, A5E03915895-AH
Parameters/address space
4
4.1
Parameters
Parameters for IM 155-6 PN/2 HF interface module
The following table shows the parameters for the interface module IM 155-6 PN/2 HF.
Table 4- 1 Parameters for IM 155-6 PN/2 HF interface module (GSD file)
Parameters
Value range
Default
Effective range
Enable configuration control Yes/No No ET 200SP
Diagnostics (maintenance) un-
dervoltage
Yes/No No ET 200SP
4.2
Explanation of parameters
4.2.1
Enable configuration control
Enable configuration control
You use this parameter to enable the configuration control function in the ET 200SP
distributed I/O system.
Note
If you configure the enable, the ET
200SP distributed I/O system requires a control data
reco
rd 196 from the user program in order for the ET 200SP distributed I/O system to
operate the I/O modules.
Reference
You can find more information on the control data record in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/en/58649293) system manual and
in the STEP 7 online help.